Intake Manifold Cover Replacement (LF4)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake Manifold Cover (LF4)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Intake Manifold Cover Fastener Tighten 9 N.m (80 lb in)
2	Oil Cap Procedure Remove the oil cap before removing the intake manifold cover.
3	Intake Manifold Cover Procedure Pull the intake manifold cover upward to remove.