Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the oil pan as necessary. Oil Pan Assemble (LGX RWD)
- Install Oil Pan - Oil Pan Installation (LGX RWD)
- Install the lower transmission to engine bolts. Transmission Replacement (M5N with LGX Engine)
- Install Catalytic Converter Brace Bracket - Catalytic Converter Brace Bracket Replacement (LGX)
- Install the transmission fluid cooler pipe clip bolts at the oil pan. Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, With V03)
- Install Engine Mount Bracket - Engine Mount Bracket Replacement - Right Side (LGX - RWD)
- Install Engine Oil Cooler Inlet Pipe - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Install Engine Oil Cooler Outlet Pipe - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Oil Level Indicator Switch (1) »Connect the electrical connector.
- Install Drivetrain and Front Suspension Cradle - Drivetrain and Front Suspension Cradle Replacement (LGX, LTG)
- Install Oil Level Indicator Tube - Oil Level Indicator Tube Replacement (LGX)
- Fill the engine oil to the proper level with NEW engine oil. Engine Oil and Oil Filter Replacement (LGX, RWD) .
- Fill the engine oil to the proper level with NEW engine oil. -Adhesives, Fluids, Lubricants, and Sealers (LGX)
- Start the engine and inspect for leaks.