LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Engine Mechanical - 3.6L (LGX LF4) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Pan Replacement (LGX, AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the oil pan as necessary. Oil Pan Assemble (LGX AWD)
  2. Install Oil Pan - Oil Pan Installation (LGX AWD)
  3. Fig 1: Lower Transmission To Engine Bolts
    GM4165892Courtesy of GENERAL MOTORS COMPANY
  4. Install the lower transmission to engine bolts. Transmission Replacement (M5N with LGX Engine)
  5. Install Catalytic Converter Brace Bracket- Catalytic Converter Brace Bracket Replacement (LGX)
  6. Install Engine Mount Bracket-, and Engine Mount Bracket Replacement - Right Side (LGX - AWD) 
  7. Install Oil Level Indicator Tube - Oil Level Indicator Tube Replacement (LGX) 
  8. Fig 2: Engine Oil Level Indicator Switch
    GM4165805Courtesy of GENERAL MOTORS COMPANY
  9. Engine Oil Level Indicator Switch (1) »Connect the electrical connector.
  10. Connect Engine Wiring Harness Retainer (2)
  11. Install Front Differential Carrier Assembly - Front Differential Carrier Assembly Replacement (LGX or LF4)
  12. Fill the engine oil to the proper level with NEW engine oil. -Adhesives, Fluids, Lubricants, and Sealers (LGX)
  13. Start the engine and inspect for leaks.