LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Engine Mechanical - 3.6L (LGX LF4) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Balancer Replacement (LGX) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install Crankshaft Balancer. Crankshaft Balancer Installation (LGX)
    2. Fig 1: Flywheel Holder
    GM4117498Courtesy of GENERAL MOTORS COMPANY
  2. Remove the EN-46106  tool (1) from the starter mounting hole.
  3. Install Starter Starter Replacement (LGX)
  4. Install Drive Belt. Drive Belt Replacement (LGX) 
  5. Perform the crankshaft position variation learn procedure. Crankshaft Position Variation Learn
scientia non olet · About LEMON Manuals