Rear Compartment Lid Inner Panel Trim Replacement

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Compartment Lid Inner Panel Trim

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove rear compartment lid latch cover. Refer to Rear Compartment Lid Latch Cover Replacement . Unclip and reposition the upper portions of the rear compartment lid hinge covers. Refer to Rear Compartment Lid Hinge Cover Replacement .
1	Rear Compartment Lid Inside Handle Fastener CAUTION: Refer to Fastener Caution . Procedure Use a small flat-bladed tool to open integral cover to access fastener.
2	Rear Compartment Lid Inside Handle
3	Rear Compartment Lid Inner Panel Trim Assembly Procedure Use the appropriate plastic trim tool to aid in the removal of the rear compartment lid inner panel trim.