LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Parking and Turn Signal Lamp Replacement (Traverse)

Parking and Turn Signal Lamp Replacement (Traverse)

Fig 1: Identifying Parking and Turn Signal Lamp (Traverse)
GM2076972Courtesy of GENERAL MOTORS CORP.
Parking and Turn Signal Lamp Replacement (Traverse)

Callout Component Name
Preliminary Procedure 
Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement (Enclave - Acadia) , Front Wheelhouse Front Liner Replacement (Traverse) .
1 Park and Turn Signal Lamp Assembly Screw (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
1.5 N.m (13 lb in)
2 Park and Turn Signal Lamp Assembly

Procedure

  1. Disconnect the jumper harness from the forward lamp harness connector.
  2. Transfer the jumper harness with bulb sockets and bulbs as needed.
  3. Remove the lamp assembly from the upper fascia reinforcement bracket.
scientia non olet · About LEMON Manuals