LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Adjuster Track Adjustment >> Inspection and Cleaning Procedure

Inspection and Cleaning Procedure

  1. Remove the rear seat. Refer to Rear Seat Replacement (With 40 Percent Seat) , Rear Seat Replacement (With 60 Percent Seat) .
  2. Inspect the seat track for debris or foreign materials, if the track needs to be cleaned, perform the following steps:
      WARNING:

      Refer to Safety Glasses and Compressed Air Warning .

      NOTE:

      Use care when using compressed air to clear the sunroof drain hose. Do not exceed 241 kPa (35 psi).

    • Use a flexible wire or 689 kPa (100 psi) of compressed air to clear any material plugging the obstructing the seat track.
    • The mechanical components of the seat track assembly receive lubrication during assembly. If any seat track needs additional lubrication, use multi-purpose lubricant GM P/N 12346241 (Canadian P/N 10953474) or equivalent.
  3. Install the rear seat and test for proper operation. Refer to Rear Seat Replacement (With 40 Percent Seat) , Rear Seat Replacement (With 60 Percent Seat) .
scientia non olet · About LEMON Manuals