LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (2 Of 5)) >> Engine Block Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove any old thread sealant, gasket material or sealant using EN 28410:  remover.
  2. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  3. Clean all threaded and through holes with solvent.
    4. WARNING: Refer to Safety Glasses Warning .
  4. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals