LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (2 Of 5)) >> Cylinder Head Cleaning and Inspection >> Cylinder Head Measurement >> Camshaft Journal Clearance

Camshaft Journal Clearance

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the camshaft bearing cap in the cylinder head without the camshaft.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the camshaft cap bolts and tighten to 10 N.m (89 lb in).
  3. Measure the camshaft bearings using an inside micrometer.
  4. Subtract the camshaft journal diameter from the camshaft bearing diameter. This will provide the running clearance. If the running clearance exceeds specifications and the camshaft journals are within specification, replace the cylinder head.
scientia non olet · About LEMON Manuals