LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (2 Of 5)) >> Crankshaft and Bearing Removal >> Crankshaft End Play Measurement

Crankshaft End Play Measurement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a dial indicator at the crankshaft nose.
  2. Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
  3. The crankshaft end play should not exceed specifications. Refer to Engine Mechanical Specifications (LF1) or Engine Mechanical Specifications (LAU or LBW) .
  4. If the specifications are exceeded inspect the thrust bearing thrust OD and the crankshaft thrust wall for wear and/or excessive runout. Refer to Engine Mechanical Specifications (LF1) or Engine Mechanical Specifications (LAU or LBW) .
  5. Replace the thrust bearing or crankshaft as necessary.
scientia non olet · About LEMON Manuals