Instrument Cluster Replacement (Acadia)

Fig 1: View Of Instrument Cluster (Acadia)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument cluster trim plate bezel. Refer to Instrument Panel Trim Plate Replacement (Acadia) or Instrument Panel Trim Plate Replacement (Enclave) or Instrument Panel Trim Plate Replacement (Outlook) .
1	Instrument Cluster Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Cluster Assembly Procedures Disconnect the electrical connections. Refer to Control Module References for programming and setup information.

Callout

Component Name

Instrument Cluster Screw (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Instrument Cluster Assembly

Procedures