Seat Belt Retractor Replacement - No. 1 Rear

Fig 1: Identifying Seat Belt Retractor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the body lock pillar upper garnish molding. Refer to Body Lock Pillar Upper Trim Panel Replacement . Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement (without RPO E61) or Rear Quarter Lower Trim Panel Replacement (with RPO E61) .
1	Rear Seat Shoulder Belt Guide Adjuster Bolt NOTE: Refer to Fastener Notice . Tighten: 45 N.m (33 lb ft)
2	Rear Seat Shoulder Belt Retractor Bolt Tighten: 45 N.m (33 lb ft)
3	Rear Seat Shoulder Belt Anchor Bolt Tighten: 45 N.m (33 lb ft)
4	Rear Seat Shoulder Belt Retractor Assembly