LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Transfer Case - NVG 261-NP2 - Service & Troubleshooting) >> Repair Instructions >> Transfer Case Gear Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement .
  2. Disconnect the gear indicator switch electrical connector (2).
    Fig 1: Disconnecting Gear Indicator Switch Electrical Connector
    GM860643Courtesy of GENERAL MOTORS CORP.
  3. Remove the gear indicator switch.
    Fig 2: Removing Gear Indicator Switch
    GM393367Courtesy of GENERAL MOTORS CORP.