Front Side Door Window Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Door Window & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Position the door window as needed for service. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (YE9) or Front Side Door Trim Panel Replacement (SLT) . Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement . Remove the front side door inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement . Remove the front weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .
1	Front Door Window Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Procedure: Loosen the 2 bolts that attach the window to the window regulator. Tighten: 10 N.m (89 lb in)
2	Front Door Window Tip: The window must be tilted downward into the door to remove it.

Callout

Component Name

Preliminary Procedures

Position the door window as needed for service.
Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (YE9) or Front Side Door Trim Panel Replacement (SLT) .
Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
Remove the front side door inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
Remove the front weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .

Front Door Window Bolt (Qty: 2)

NOTE: Refer to Fastener Notice .

Procedure:
Loosen the 2 bolts that attach the window to the window regulator.

Tighten: 10 N.m (89 lb in)

Front Door Window
Tip: The window must be tilted downward into the door to remove it.