Removal Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Open the rear side door.
- Remove the rear side door trim panel. Refer to Rear Side Access Door Trim Panel Replacement .
- Remove the screws (1) retaining the upper latch to the rear side door.
- Disconnect the upper latch cable (2) from the latch by releasing the retaining clip.
- Remove the upper latch (3) from the rear side door.