LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 973 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Impact Bar Outer Reinforcement Replacement (GMC)

Front Bumper Impact Bar Outer Reinforcement Replacement (GMC)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Bumper Impact Bar Outer Reinforcement (GMC)
GM1828276Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement (GMC)  or Front Bumper Impact Bar Replacement (Chevrolet) .
  2. Remove the front bumper impact bar bracket. Refer to Front Bumper Impact Bar Bracket Replacement (GMC) .
1 Front Bumper Impact Bar Outer Reinforcement Nut
NOTE: Refer to Fastener Notice .

Tighten:  50 N.m (37 lb ft)

2 Front Bumper Impact Bar Outer Reinforcement Bolt
3 Front Bumper Impact Bar Outer Reinforcement