Hood Open Assist Spring Replacement
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Hood Open Assist Spring Replacement
| Callout | Component Name |
|---|---|
|
CAUTION:
When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedures: Remove the hood. Refer to Hood Replacement . |
|
| 1 | Hood Open Assist Spring Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 22 N.m (16 lb ft) |
| 2 | Hood Spring |