Rear Side Door Inside Handle Replacement (Without (YE9))

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Side Inside Door Handle Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove door window control switch. Refer to Rear Side Door Window Switch Replacement (Extended Cab) or Rear Side Door Window Switch Replacement (Crew Cab) . Remove door trim panel. Refer to Rear Side Door Trim Panel Replacement (YE9) or Rear Side Door Trim Panel Replacement (SLT) .
1	Rear Side Door Inside Handle Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Rear Side Door Inside Handle Assembly

Callout

Component Name

Preliminary Procedures

Remove door window control switch. Refer to Rear Side Door Window Switch Replacement (Extended Cab) or Rear Side Door Window Switch Replacement (Crew Cab) .
Remove door trim panel. Refer to Rear Side Door Trim Panel Replacement (YE9) or Rear Side Door Trim Panel Replacement (SLT) .

Rear Side Door Inside Handle Bolt (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Rear Side Door Inside Handle Assembly