Endgate Handle Replacement (Pickup Box)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Endgate Handle Replacement (Pickup Box)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the pickup box endgate latch handle bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Utility) or Pickup Box Endgate Latch Handle Bezel Replacement (Pick Up) . |
|
| 1 | Pickup Box Endgate Latch Handle Bolt (Qty: 3)
NOTE:
Refer to Fastener Notice
.
Tighten: 25 N.m (18 lb ft) |
| 2 | Pickup Box Endgate Latch Handle Tip: Release all of the rods before removing. |