Pickup Box Endgate Latch Handle Bezel Replacement (Pick Up)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Pickup Box Endgate Latch Handle Bezel (Pick Up)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Pickup Box Endgate Latch Handle Bezel Bolt Remove the bolt prior to releasing the latch handle bezel from the endgate outer panel. NOTE: Refer to Fastener Notice . Tighten: 25 N.m (18 lb ft)
2	Pickup Box Endgate Latch Handle Bezel Procedure Release the 3 retainer clips securing the bezel to the endgate outer panel. Lift the endgate latch handle in order to aid in the removal of the latch handle bezel.

Callout

Component Name

Pickup Box Endgate Latch Handle Bezel Bolt
Remove the bolt prior to releasing the latch handle bezel from the endgate outer panel.

NOTE: Refer to Fastener Notice .

Tighten: 25 N.m (18 lb ft)

Pickup Box Endgate Latch Handle Bezel

Procedure

Release the 3 retainer clips securing the bezel to the endgate outer panel.
Lift the endgate latch handle in order to aid in the removal of the latch handle bezel.