Instrument Panel Lower Trim Panel Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Lower Trim Panel Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the instrument panel upper trim panel assembly. Refer to Instrument Panel Upper Trim Panel Replacement (without RPO SLT) or Instrument Panel Upper Trim Panel Replacement (with RPO SLT) . Remove the steering column. Refer to Steering Column Replacement .
1	Instrument Panel Lower Trim Panel to HVAC Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Lower Trim Panel to Body Nut (Qty: 4) Tighten: 9 N.m (80 lb in)
3	Instrument Panel Lower Trim Panel Bolt (Qty: 7) Tighten: 2.5 N.m (22 lb in)
4	Instrument Panel Lower Trim Panel Assembly Tip: Note location and routing of the instrument panel wiring harness prior to removal of the instrument panel lower trim panel assembly to ensure proper reinstallation. Disconnect the wiring harness from the instrument panel lower trim panel assembly. With the aid of an assistant, remove the instrument panel lower trim panel assembly from the vehicle. If replacing the instrument panel lower trim panel assembly, transfer all necessary components.