Front Floor Panel Carpet Replacement (Crew Cab)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Floor Panel Carpet (Crew Cab)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove front seats. Refer to Front Seat Replacement - Bucket . Remove center front seat. Refer to Center Seat Replacement . Remove rear seats. Refer to Rear Seat Replacement (Extended Cab with RPO AM7) or Rear Seat Replacement (Extended Cab with RPO A68) or Rear Seat Replacement (Crew Cab with RPO A68) . Remove floor console. Refer to Front Floor Console Replacement (without RPO SLT) or Front Floor Console Replacement (with RPO SLT) . Remove front seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front (Regular Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Extended Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Crew Cab) . Remove rear center seat belt buckles. Refer to Rear Seat Center Belt Buckle Replacement (Ext Cab w/A68) or Rear Seat Center Belt Buckle Replacement (Ext Cab w/AM7) or Rear Seat Center Belt Buckle Replacement (Crew Cab) . Remove jack stowage cover. Refer to Jack Stowage Cover Replacement . Remove body lock pillar trim panels. Refer to Body Lock Pillar Trim Replacement (Regular Cab) or Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Crew Cab) . Remove front hinge pillar trim panels. Refer to Body Hinge Pillar Trim Panel Replacement . Remove center pillar lower molding. Refer to Center Pillar Lower Garnish Molding Replacement .
1	Floor Panel Carpet Assembly Tip: Pull body harness fully forward in vehicle position to forward edge of carpet slit in order to clear console bracket. Lift the HVAC floor ducts to place the carpet underneath.

Callout

Component Name

Preliminary Procedures

Remove front seats. Refer to Front Seat Replacement - Bucket .
Remove center front seat. Refer to Center Seat Replacement .
Remove rear seats. Refer to Rear Seat Replacement (Extended Cab with RPO AM7) or Rear Seat Replacement (Extended Cab with RPO A68) or Rear Seat Replacement (Crew Cab with RPO A68) .
Remove floor console. Refer to Front Floor Console Replacement (without RPO SLT) or Front Floor Console Replacement (with RPO SLT) .
Remove front seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front (Regular Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Extended Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Crew Cab) .
Remove rear center seat belt buckles. Refer to Rear Seat Center Belt Buckle Replacement (Ext Cab w/A68) or Rear Seat Center Belt Buckle Replacement (Ext Cab w/AM7) or Rear Seat Center Belt Buckle Replacement (Crew Cab) .
Remove jack stowage cover. Refer to Jack Stowage Cover Replacement .
Remove body lock pillar trim panels. Refer to Body Lock Pillar Trim Replacement (Regular Cab) or Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Crew Cab) .
Remove front hinge pillar trim panels. Refer to Body Hinge Pillar Trim Panel Replacement .
Remove center pillar lower molding. Refer to Center Pillar Lower Garnish Molding Replacement .

Floor Panel Carpet Assembly
Tip:

Pull body harness fully forward in vehicle position to forward edge of carpet slit in order to clear console bracket.
Lift the HVAC floor ducts to place the carpet underneath.