Reverse Input Clutch Disassemble

Special Tools

• J 23327-1:  Forward Clutch Spring Compressor (Bridge)
• J 25018-A:  Clutch Spring Compressor Adapter

Fig 1: Locating Reverse Input Clutch Plates
Courtesy of GENERAL MOTORS CORP.
1. Remove the reverse input clutch retaining ring (614).
2. Remove all reverse input clutch plates (611-613).
Fig 2: View Of Reverse Input Clutch Spring Retainer Ring
Courtesy of GENERAL MOTORS CORP.
3. Install the J 23327-1:  compressor (bridge) and the J 25018-A:  compressor adapter.
4. Compress the reverse input clutch spring assembly.
5. Remove the reverse input clutch spring retainer ring (610).
Fig 3: Identifying Reverse Input Clutch Spring & Piston Assemblies
Courtesy of GENERAL MOTORS CORP.
6. Remove the reverse input clutch spring assembly (609).
7. Remove the reverse input clutch piston assembly (607).