Input Internal Gear, Reaction Shaft and Shell Installation

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

J 36850: Transjel Lubricant

Fig 1: View Of Input Internal Gear, Reaction Shaft & Sun Shell

Courtesy of GENERAL MOTORS CORP.

Install the reaction sun shell (670) into the reaction sun gear.
Install the thrust bearing (669) using J 36850: transjel lubricant onto the reaction carrier shaft, tangs up, toward the shaft.
Install the input internal gear (664) and reaction carrier shaft (666) assembly into the sun gear shell. Index the reaction carrier shaft spline into the reaction carrier.