Output Carrier Assembly Overhaul (6L90)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Output Carrier Front Sun Gear Thrust Bearing Assembly |
| 2 | Center Support Roller Bearing
CAUTION:
Do not reuse the center support roller bearing. Install a NEW center support roller bearing. Reusing an old bearing may result in damage to the output carrier. Tip: The thick side of the bearing shell faces up. Special Tools
For equivalent regional tools, refer to Special Tools . |
| 3 | Output Carrier Front Sun Gear
CAUTION:
Install the gear chamfer side up. Failure to install the gear chamfer side up may result in transmission damage.
|
| 4 | Output Carrier Front Sun Gear Rear Thrust Bearing Assembly |
| 5 | Output Carrier Rear Sun Gear
CAUTION:
Install the gear chamfer side up. Failure to install the gear chamfer side up may result in transmission damage.
|
| 6 | Output Carrier Rear Sun Gear Bearing Assembly Tip: Inspect for damage only. Do not remove. The bearing assembly is not a serviceable component. |