4-5-6 Clutch Dampener Overhaul (6L50/80/90)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | 4-5-6 Clutch Dampener Retaining Ring
CAUTION:
Ensure the retaining ring is fully seated when installed. Using a screwdriver, fully seat the retaining ring into the groove by pushing on the inside diameter around the whole circumference. If the retaining ring is not fully seated, transmission damage will result.
|
| 2 | 4-5-6 Clutch Dampener Apply Plate |
| 3 | 4-5-6 Clutch Dampener Tip: Dry and inspect the clutch dampener for the following conditions:
|