2-6 Clutch Piston Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | 2-6 Clutch Spring Retaining Ring Tip: Ensure the DT 47761: spring compressor is centered over the clutch spring. Special Tool: DT 47761: Clutch Spring Compressor For equivalent regional tools, refer to Special Tools . |
| 2 | 2-6 Clutch Spring
CAUTION:
Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
|
| 3 | 2-6 Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston. |