LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1588 (Parking Brake System) >> Repair Instructions >> Parking Brake Rear Cable Replacement - Left Side (JF3, JF7, JG4) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Park Brake Cable
    GM1306858Courtesy of GENERAL MOTORS CORP.
  1. Install the park brake cable assembly into the backing plate.
  2. Install the brake shoes. Refer to Brake Shoe Replacement .
  3. Install the park brake cable to the cable guides.
    4. Fig 2: Park Brake Cable & Intermediate Cable Equalizer Bar
    GM1850953Courtesy of GENERAL MOTORS CORP.
  4. Connect the left rear park brake cable (1) to the intermediate cable equalizer bar (2).
  5. Insert the park brake cable conduit (3) into the frame bracket.

    Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

  6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
  7. Adjust the park brake. Refer to Parking Brake Adjustment (1500 Drum Brake)  or Parking Brake Adjustment (1500 Disc Brake)  or Parking Brake Adjustment (2500/3500 SRW)  or Parking Brake Adjustment (3500 DRW) .
scientia non olet · About LEMON Manuals