Parking Brake Cable Adjuster Enabling
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Hold the park brake pedal in the FULL upward position.
- Pull rearward on the front park brake cable until the tension is released from the tool (1) installed in the pedal assembly.
- Remove the tool (1).
- Slowly release the park brake cable until it returns to its original position.
- Release the park brake pedal.
- Lower the vehicle.
- Apply and release the park brake pedal 3 times.