Rear Side Door Window Weatherstrip Replacement (Crew Cab)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Side Door Window Weatherstrip (Crew Cab)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Position the door window as needed for service. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (SLT) or Rear Side Door Trim Panel Replacement (YE9) . Remove the rear door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Crew Cab) or Rear Side Door Window Inner Sealing Strip Replacement (Extended Cab) .
1	Rear Door Window Weatherstrip Procedure Use a plastic flat-bladed tool to assist in releasing the window weatherstrip from the door frame. Carefully pull the window weatherstrip from the door flange.

Callout

Component Name

Preliminary Procedures

Position the door window as needed for service.
Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (SLT) or Rear Side Door Trim Panel Replacement (YE9) .
Remove the rear door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Crew Cab) or Rear Side Door Window Inner Sealing Strip Replacement (Extended Cab) .

Rear Door Window Weatherstrip

Procedure

Use a plastic flat-bladed tool to assist in releasing the window weatherstrip from the door frame.
Carefully pull the window weatherstrip from the door flange.