Removal Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Pull the door trim panel away from the door and support the bottom of the trim panel on the door panel hooks. Refer to Rear Side Door Trim Panel Replacement (SLT) or Rear Side Door Trim Panel Replacement (YE9) .
- Remove the rear side door inside handle fasteners (1).
- Remove the rear side door inside handle fasteners assembly (2).
- Disconnect the electrical connector.
- Depress both tabs to remove the rear side door cable and pull the cable rearward out of the handle assembly.