Section 1404 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L (3 Of 5))
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions - On Vehicle (2 Of 2)
- Repair Instructions - Off Vehicle (1 Of 3)
- Engine Oil and Oil Filter Replacement
- Draining Fluids and Oil Filter Removal
- Crankshaft Balancer Removal
- Automatic Transmission Flex Plate Removal
- Oil Level Indicator and Tube Removal
- Exhaust Manifold Removal - Left Side
- Exhaust Manifold Removal - Right Side
- Water Pump Removal (RPO LY2/LH6/LMG/LY5/LC9)
- Water Pump Removal (RPO LY6/L76/L9H)
- Throttle Body Assembly Removal
- Fuel Rail and Injectors Removal
- Intake Manifold Removal (RPO LY2/LY6/L9H)
- Intake Manifold Removal (RPO LH6/LMG/LY5/LC9/L76)
- Engine Coolant Air Bleed Pipe and Hole Cover Removal (RPO LY2/LY6/L9H)
- Engine Coolant Air Bleed Pipe and Hole Cover Removal (RPO LH6/LMG/LY5/LC9/L76)
- Engine Block Valley Cover Removal
- Valve Lifter Oil Manifold Removal
- Valve Lifter Oil Filter Removal
- Valve Rocker Arm Cover Removal - Left Side
- Valve Rocker Arm Cover Removal - Right Side
- Valve Rocker Arm and Push Rod Removal (RPO LY2/LH6/LMG/LY5/LC9)
- Valve Rocker Arm and Push Rod Removal (RPO LY6/L76/L9H)
- Cylinder Head Removal - Left Side
- Cylinder Head Removal - Right Side
- Valve Lifter Removal (RPO LY2/LY6/L9H)
- Valve Lifter Removal (RPO LH6/LMG/LY5/LC9/L76)
- Oil Filter Removal
- Oil Pan Removal
- Engine Front Cover Removal (RPO LY2/LH6/LMG/LY5/LC9)
- Engine Front Cover Removal (RPO LY6/L76/L9H)
- Crankshaft Rear Oil Seal Housing Removal
- Oil Pump, Screen and Crankshaft Oil Deflector Removal (RPO LY2/LH6/LMG/LY5/LC9)
- Oil Pump, Screen and Crankshaft Oil Deflector Removal (RPO LY6/L76/L9H)
- Timing Chain and Sprocket Removal
- Camshaft Position Actuator and Solenoid Valve Removal
- Camshaft Removal
- Piston, Connecting Rod, and Bearing Removal
- Crankshaft and Bearing Removal
- Engine Block Plug Removal
- Engine Block Cleaning and Inspection
- Cylinder Boring and Honing
- Crankshaft and Bearing Cleaning and Inspection
- Crankshaft Balancer Cleaning and Inspection
- Automatic Transmission Flex Plate Cleaning and Inspection