Front Side Door Window Front Channel and Rear Channel Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Door Window Channel & Bolt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Position the door window as needed for service. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (SLT, A95) or Front Side Door Trim Panel Replacement (Except YE9 or SLT) . Remove the water deflector. Refer to Front Side Door Water Deflector Replacement . Remove the front door inner sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
1	Front Door Window Run Channel Lower Bolt CAUTION: Refer to Fastener Caution . Tighten: 11 N.m (97 lb in)
2	Front Door Window Run Channel

Callout

Component Name

Preliminary Procedures

Position the door window as needed for service.
Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (SLT, A95) or Front Side Door Trim Panel Replacement (Except YE9 or SLT) .
Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
Remove the front door inner sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .

Front Door Window Run Channel Lower Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 11 N.m (97 lb in)

Front Door Window Run Channel