LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Back Cushion Frame Replacement

Driver or Passenger Seat Back Cushion Frame Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Seat Back Frame Components
GM1950027Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement .
  3. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
1 Front Seat Back Frame Bolt (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  50 N.m (37 lb ft)
2 Seat Back Frame

Procedure

  1. Disconnect the electrical connector, if equipped.
  2. When replacing the seat back frame transfer components as necessary.
scientia non olet · About LEMON Manuals