Front Bumper Impact Bar Bracket Replacement (GMC)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Bumper Impact Bar Bracket (GMC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia trim cap. Refer to Front Bumper Fascia Trim Cap Replacement (GMC) . Remove the front headlamps. Refer to Headlamp Replacement (Chevrolet) , Headlamp Replacement (GMC HD) or Headlamp Replacement (HD Diesel) .
1	Front Bumper Impact Bar Bracket Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 50 N.m (37 lb ft)
2	Front Bumper Impact Bar Bracket Bolt (Qty: 2)
3	Front Bumper Impact Bar Bracket Rivet (Qty: 2)
4	Front Bumper Impact Bar Bracket