Front Bumper Fascia Side Bracket Replacement (GMC)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia trim cap. Refer to Front Bumper Fascia Trim Cap Replacement (GMC) . |
|
| 1 | Front Bumper Fascia Side Bracket Bolts (Qty: 3)
CAUTION:
Refer to Fastener Caution
.
Tighten: 7 N.m (62 lb in) |
| 2 | Front Bumper Fascia Side Bracket Tip: Remove the two plastic retainers securing the front wheelhouse liner to the front bumper fascia side bracket. |