LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Engine Mechanical - 3.6L (3 Of 6)) >> On-Vehicle Repair Instructions (2 Of 2) >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the oil pan as necessary. Refer to Oil Pan Assemble (RWD) or Oil Pan Assemble (AWD) .
    2. Fig 1: View of Oil Pan Assembly
    GM1306202Courtesy of GENERAL MOTORS CORP.
  2. Install the oil pan. Refer to Oil Pan Installation (RWD) or Oil Pan Installation (AWD) .
  3. Loosen the engine support fixture wing nuts in order to lower the engine and engage the engine mounts to the frame.
  4. Remove the engine support fixture. Refer to Engine Support Fixture .
  5. Remove the transmission oil cooler pipe retainer from the engine right side.
  6. Fill the engine with new engine oil. Refer to Engine Oil and Oil Filter Replacement .
  7. Install the A/C compressor bracket with the A/C compressor. Refer to Compressor Replacement .
    8. Fig 2: Identifying Frame Mounting Nuts
    GM785352Courtesy of GENERAL MOTORS CORP.
  8. Install the engine mount lower nuts. Refer to Engine Mount Replacement - Left Side (AWD) or Engine Mount Replacement - Left Side (RWD) and Engine Mount Replacement - Right Side (w/AWD) or Engine Mount Replacement - Right Side (w/RWD) .
    9. Fig 3: View Of Intermediate Steering Shaft
    GM754891Courtesy of GENERAL MOTORS CORP.
  9. Connect the intermediate steering shaft. Refer to Upper Intermediate Steering Shaft Replacement .
  10. Install the power steering hose retainer to the A/C compressor bracket.
  11. Install the engine front cover. Refer to Engine Front Cover Replacement .
scientia non olet · About LEMON Manuals