LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1156 (Transfer Case - BW 4477) >> Diagnostic Information and Procedures >> Transfer Case Clunk during Acceleration and Deceleration

Transfer Case Clunk during Acceleration and Deceleration

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Cause Correction
DEFINITION: During acceleration or deceleration, a clunk is heard or felt in the transfer case.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Incorrect fluid level or incorrect fluid
  1. Inspect the transfer case for the correct fluid level. Refer to Transfer Case Fluid Replacement .
  2. Inspect the transfer case for the correct type of fluid.
  3. Flush the transfer case, and fill with the correct fluid, if required. Refer to Approximate Fluid Capacities .
Worn or loose chain
  1. Inspect for a loose chain, excessive wear on the snubber or deep gouges in the lining.
  2. Replace the chain, sprockets, and snubber. Refer to Transfer Case Disassemble  and Transfer Case Assemble .