LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Engine Mechanical - 3.6L (2 Of 6)) >> On-Vehicle Repair Instructions (1 Of 2) >> Fuel Injector Sight Shield Replacement (LY7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Cover/Sight Shield
    GM1469395Courtesy of GENERAL MOTORS CORP.
  1. Remove the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement .
  2. Remove the oil fill cap.
  3. Disengage the cover/shield from the ball studs by pulling up firmly on the right rear and left front of the engine cover.
  4. Remove the engine cover/sight shield.
  5. Remove the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement .
scientia non olet · About LEMON Manuals