Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Window Assembly

Courtesy of GENERAL MOTORS CORP.

Install the front window channel into the door, top end first.
Insert the lower bolt into the keyhole slot.
Rotate the top of the front window channel rearward and align on the lower edge of the window.

NOTE: Refer to Fastener Notice

Install the upper bolt.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the water deflector.
Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .