LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of A/C Refrigerant Pressure Sensor & Electrical Connector
    GM789018Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the O-ring with refrigerant oil. Refer to O-Ring Replacement .
  2. NOTE: Refer to Fastener Notice .
  3. Install the A/C refrigerant pressure sensor (2).

    Tighten:  Tighten the sensor to 9.8 N.m (87 lb in).

  4. Connect the electrical connector (1) to the A/C refrigerant pressure sensor.
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging .
  7. Leak test the fittings of the component using J 39400-A  . See Special Tools .