Rear Bumper Fascia Insert Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Fascia Insert Assembly Rear Bumper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear bumper. Refer to Rear Bumper Fascia Replacement .
1	Rear Bumper Fascia Insert Clip (Qty: 14) Procedure: Use a flat-bladed tool to release the clips.
2	Rear Bumper Fascia Insert push-pin(Qty: 2)
3	Rear Bumper Fascia Insert Tip: Remove energy absorber foam and transfer