LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 2 Of 3) >> Off-Vehicle Repair Instructions - Part 2 >> Cylinder Head Removal - Right

Cylinder Head Removal - Right

    Fig 1: Cylinder Head Bolts
    GM1424504Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plugs from the cylinder head.
    2. IMPORTANT: The cylinder head bolts can NOT be used again. Install NEW cylinder head bolts during assembly.
  2. Remove the cylinder head bolts.
    3. NOTE: After removal, place the cylinder head on two wood blocks to prevent damage to the sealing surfaces.
  3. Remove the cylinder head.
    4. Fig 2: View Of Right Cylinder Head Gasket And Alignment Pins
    GM63170Courtesy of GENERAL MOTORS CORP.
  4. Remove the gasket.
  5. Discard the gasket.
  6. Discard the cylinder head bolts.
scientia non olet · About LEMON Manuals