LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1634 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM1557855Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the NEW oil seal with clean engine oil.
  2. Align the EN-48869  and the crankshaft front oil seal with the engine front cover and crankshaft. See Special Tools .
  3. Install the crankshaft front oil seal using EN-48869  and a suitable tool. See Special Tools .
  4. Install the crankshaft key into the keyway.
  5. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals