LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1634 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Installation

Crankshaft Front Oil Seal Installation: Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Crankshaft Front Oil Seal
    GM2047119Courtesy of GENERAL MOTORS CORP.
  1. Place the crankshaft front oil seal on the EN-48869  with lip facing inward, aligning crankshaft keyway to the groove in the installer. See Special Tools .
  2. Thread the forcing bolt with bearing, washer and nut as shown.
  3. Tighten the nut until seal bottoms, then remove the EN-48869  . See Special Tools .
scientia non olet · About LEMON Manuals