Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fan Assembly Bolts From The Radiator

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Install the fan assembly to the radiator by guiding the lower tabs into the corresponding hooks on the radiator.
Install the fan assembly bolts to the radiator.

Tighten: Tighten the bolts to 8 N.m (71 lb in).
Position the CRFM assembly onto the lower mounts.

Fig 2: View Of CRFM Mounting Brackets To The Radiator Support

Courtesy of GENERAL MOTORS CORP.

Install the CRFM mounting brackets to the radiator support.
Install the CRFM mounting bracket bolts to the radiator support.
Tighten: Tighten the bolts to 8 N.m (71 lb in).

Fig 3: View Of Radiator Outlet Hose

Courtesy of GENERAL MOTORS CORP.

Install the radiator outlet hose to the radiator.
Install the radiator outlet hose clamp to the radiator.

Fig 4: View Of Radiator Hose

Courtesy of GENERAL MOTORS CORP.

Install the radiator inlet hose to the radiator.
Install the radiator inlet hose clamp to the radiator.

Fig 5: View Of CRFM Closeout/Splash Panel To Condenser

Courtesy of GENERAL MOTORS CORP.

Install the CRFM closeout panel to the condenser.
Install the CRFM closeout panel retainers to the condenser.

Fig 6: View Of Cooling Fan & Shroud (L61)

Courtesy of GENERAL MOTORS CORP.

Clip the transmission cooler lines to the fan assembly.
Clip the engine wire harness to fan assembly.
Install the electrical connectors to the fan motors.
Install the front fascia. Refer to Front Bumper Fascia Replacement (Redline) or Front Bumper Fascia Replacement (Standard) .
Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .