Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hydraulic Press Compressing Tensioner

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not exceed 9 800 N (2,200 lb) when compressing the rod of the tensioner or component damage may occur.

Using a hydraulic press, slowly compress the tensioner.
Insert the EN 46330 through the housing and rod. See Special Tools .

Fig 2: Identifying Tensioner

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the tensioner (252) and bolts (251).
Tighten: Tighten the bolts to 25 N.m (18 lb ft).

Fig 3: View Of Timing Belt Tensioner

Courtesy of GENERAL MOTORS CORP.

Install the bushing (3), tensioner bracket (2) and bolt (1).
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
Install the pulley (4) and nut (5).
Tighten: Tighten the nut to 80 N.m (59 lb ft).
Install the timing belt. Refer to Timing Belt Replacement .