LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 4.3L >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

  1. Remove the lower intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT - LOWER  .
  2. Remove the valve rocker arms and the valve push rods. Refer to VALVE ROCKER ARM AND PUSH ROD REPLACEMENT  .
  3. Remove the valve lifters. Refer to VALVE LIFTER REMOVAL  .
  4. Use a cleaning solvent and a shop towel to clean any varnish from the valve lifter bores.
  5. Inspect the valve lifter bores for excessive wear or scoring. Replace the engine block if there is excessive wear or deep scoring.
  6. Inspect the camshaft for wear or damage. If the wear is questionable remove the camshaft and inspect. Refer to CAMSHAFT AND BEARINGS CLEANING AND INSPECTION  .
  7. Clean and inspect the valve lifters and the valve pushrod guide. Refer to VALVE LIFTERS AND GUIDES CLEANING AND INSPECTION  .
scientia non olet · About LEMON Manuals