Front Cover Oil Seal: Installation
WARNING: This page is about a different car, the 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Install front cover oil seal on crankshaft with spring side of oil seal toward the engine. Using Oil Seal Installer (C-4992), install front cover oil seal until oil seal is even with surface of timing chain cover.
- Using Plate (L-4524), thrust bearing/washer and bolt, install vibration damper. Remove plate, thrust bearing/washer and bolt. Install and tighten vibration damper bolt to specification. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.