LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (3.0L V6 - VIN [3]) >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place cylinder number reference mark on connecting rod and cap before removing. When replacing rod bearings, ensure front mark "72" on connecting rod faces toward front (timing belt side) of engine. See Figure.
  2. Tighten connecting rod nuts to specification. Refer to TORQUE SPECIFICATIONS . Ensure bearing oil clearance and side play are within specifications. See CRANKSHAFT , MAIN & CONNECTING ROD BEARINGS and CONNECTING RODS  tables under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals